The properties of admixtures

The properties of admixtures in concrete

The properties of admixtures is an admixture that can greatly reduce the amount of mixing water under the condition of the same slump of concrete. The plasticizer is a kind of concrete admixture that can reduce water consumption under the condition of keeping the slump of concrete basically unchanged. Mostly anionic surfactants, lignosulfonate, naphthalene sulfonate formaldehyde polymers. After adding the concrete mixture, it has a dispersive effect on cement particles, can improve its workability, reduce water consumption per unit and improve the fluidity of concrete mixture; Or reduce the amount of cement per unit, save cement. The properties of admixtures in the concrete slump is basically the same, can make mixing water consumption reduce the admixture by more than 15%.

Inquiry E-mail:  brad@ihpa.net

The properties of admixtures: Types, Advantages & Disadvantages

THE properties of admixtures

The properties of admixtures is also known as high- range water reducers that are additive used in making high strength concrete. Plasticizers are chemical compounds that enable the production of concrete with approximately 15% less water content. The properties of admixtures allows a 30% or more reduction in water content.

It is chemical admixtures that are added to the concrete to improve their flowing ability, they help to reduce the amount of water in the concrete and to improve the strength and durability of concretes.

They achieve a reduction in water content without loss of workability.

The properties of admixtures - Peramin - Imerys Aluminates

The properties of admixtures enable to achieve high flow properties and reduce water content in self levelling compounds and screed technology

The properties of admixtures, is high-range water reducing additives used when the dispersion of particles in suspension is required to modify mortars and concrete to allow:

A large reduction of the water content, without affecting their workability:

Improvement of properties: shorter setting time, lower shrinkage and higher mechanical strengths

Or a greater flowability, with the same water content:

Decrease of viscosity, resulting in excellent flow properties

Very good self-levelling properties

Typically, the dosage normally lies in the range of 0.1%-0.8% of the dry mortar total weight, depending of the kind of The properties of admixtures and performance required.

Concrete High Range Water Reducer Polycarboxylate Ether Based The properties of admixtures

FOB Price: US $ 700-800 / Ton

Min. Order: 1 Ton

After-sales Service: 1year

Type: water-reducing admixture

Appearance: Colorless or Yellowish Liquid

Solid Content: 40%, 50%

Density: 1.10+/- 0.05 g/cm3

pH Value: 6.5+/-1.0

Excellent Adaptability The properties of admixtures for Self- Leveling with Competitive Price

FOB Price: US $ 2.5-3.5 / kg

Min. Order: 1000 kg

After-sales Service: Technical Support

Type: water-reducing admixture

Packing: Pallet

Standard: 25kg

Port: Tianjin

Production Capacity: 2000

Polycarboxylate The properties of admixtures of 98% Powder / Polycarboxylate The properties of admixtures of 40%Liquid

FOB Price: US $ 2500-3500 / Ton

Min. Order: 1 Ton

After-sales Service: One Year

Packing: Waterproof Bag

Standard: 25kg/bag

Port: Qingdao

Production Capacity: 20000t

Trademark: bulang

Kenya recycles plastic waste into bricks that are stronger than concrete

Nzambi Matee of Nairobi, Kenya, is throwing bricks on the pavement of a school made from recycled plastic made in her factory.

It makes a bang, but it doesn\'t crack.

"Our product is almost five to seven times stronger than concrete," says Matee, founder of Gjenge Makers, a Nairobi-based company that converts plastic waste into durable building materials. "They can\'t handle garbage anymore; They can\'t recycle. This is what we get, "Marty said, walking past bags of plastic trash.

Matee gets free waste from the packaging plant, though she pays for the plastic she gets from other recyclers. Matee is a materials engineer who designs her own machines. She said her factory has recovered 20 tons of waste plastic since it was set up in 2017. She plans to add another, larger production line that will triple capacity and hopes to break even by the end of the year.

Inquiry Now

Inquiry us