News

  • 0
  • 0

Global Foam Generator market trend 2023-2030 13kw High Expansion Foam Generator by Newspfcstal

A recent poll in Britain found that public support for sanctions against Russia is falling as fuel and prices rise.  

The proportion of people willing to accept higher fuel prices as a result of western sanctions against Russia fell 14 percentage points to 36% from 50% in March, according to a survey conducted for the Telegraph by consultancy Redfield & Wilton Strategies.  

Global energy and fuel prices have soared since the start of the year and remain high because of the conflict between Russia and Ukraine and uncertainty over Russian supplies.  

The survey also found that 54% of people believe their own financial situation has worsened in the past year, up 12 percentage points from 42% two months ago. Sixty-two percent think things will get worse in the year ahead. Less than a third of respondents said they had received a pay rise to keep up with inflation, with two-thirds of those saying it was not enough to keep up with rising living costs.  

The figures suggest that public concern about the conflict with Ukraine is now likely to be overtaken by financial worries.  

Separately, the UK's consumer price index rose 7 percent this month from a year earlier, the highest since March 1992, according to figures released recently by the Office for National Statistics. In addition, a separate report released a few days ago by the Centre for Economics and Business Research said that real household disposable income in the UK will fall by 3% in 2022, equivalent to a loss of £2,320 per household, which would lead to the biggest drop in living standards since the 1950s. That is mainly because wages aren't keeping up with rising energy and fuel costs.  

The prices of other commodities like the Foam Generator are also expected to be influenced.

Performance parameters:

The 3kW foaming machine is a small cement foam generator. It is a special equipment specially used for producing foam in small factories. It is simple and convenient to operate. It is suitable for small factories, universities, colleges, scientific research institutes and other production departments to develop new products. It can also be used for medium-sized construction in decoration projects. 


Usage and installation method:

Power connection: This equipment uses a three-phase 220V power supply. After all the lines are connected, click the start button, and then immediately click the stop button to check the direction of rotation. Make sure that the direction of rotation of the motor is correct. If the direction of rotation of the motor is incorrect, The two live wires need to be exchanged arbitrarily, and don't connect them wrongly.

Note: The panel voltmeter will display after the wiring is completed and the power is turned on. When the display voltage is normal at 220V, the air switch can be closed at this time, and the device enters the operational state.

 

Pipeline connection: Please connect the water pipe and foaming agent straw to the corresponding interface at the front of the device. use Wrap the tape around the joint to prevent air leakage. If air leakage occurs, the foaming agent cannot be pumped or 

Insufficient flow affects the efficiency of bubble making.


Bubble tube: The bubble tube is external and detachable. The front end of the bubble tube is detachable to replace the steel ball filled in the tube. The operation is simple, convenient and quick when disassembling.


Usually need to be disassembled:

1. After working for a long time, it is found that the foam shape is not good, usually more than three months.

2. Pipe blockage: Some foaming agent remaining in the bubble tube will form a solid residue. In this case, the foam cannot be produced normally, or the pipeline pressure increases sharply. At this time, all the old steel balls need to be taken out, and then replaced with a new one The ball is fine. Steel wire ball specification requirements: each blowing tube needs to be filled with about 12-15 steel wire balls. Too much or too little will affect or even destroy the foam performance. 


Precautions:

1. Remember to use electricity safely. If water or foam touches the circuit, you must immediately cut off the power at the remote end to ensure safe production.

2. There will be air in the pipeline when it is used for the first time. The foaming liquid has not been pumped into the equipment in a short time. You can wait for tens of seconds until the liquid is filled with the entire suction tube and the foaming operation can be performed normally.

3. Do not start the equipment when the pipeline is blocked to prevent damage to the components due to overpressure in the pipeline.


Model: TR130
Maximum flow: 43.6kg/min
Rated power: 13kw
Power: 380V
Size: 226*90*120cm
Weight:500kg

COVID-19 has led to many sites shutting down. What is the impact on China's foreign trade enterprises as a whole and small, medium and micro foreign trade enterprises?

. It is learned that some foreign trade enterprises have been affected by the epidemic and are facing periodic problems in Foam Generator operated by foreign trade enterprises will also fluctuate with the changes of the epidemic. Contact us for the latest quotation on Foam Generator.

Inquery us

Our Latest News

Global early strength agent market trend 2024-2029 What are Early Strength Agents? by Newspfcstal

Early strength agent is an admixture which accelerates the development of concrete early strength and has no significant effect on later strength.…

Global zinc stearate emulsion market trend 2023-2030 What is Zinc Stearate Emulsion Used For? by Newspfcstal

The US Commerce Secretary has announced that the US will temporarily lift tariffs imposed on Ukraine during the Trump administration to help Ukraine recover its economy and continue to show support for the Russia-Ukraine situation. "For steel mills t…